Every model below is in production. Washdown reels are built with a 1/2" inlet; pre-rinse units use 1/2" NPSM with a 5/8" reducer. Tell us the thread standard your market requires (NPT for the US) and we confirm it on your order.
Visible hose, easy inspection and cleaning. For food plants, loading bays and central kitchens.

Black epoxy-coated steel reel with 10.7 m three-layer steel wire hose and a 360° rotating brass spray gun.
| Hose length | 10.7 m (35 ft), 3-layer steel wire |
| Max temp. | 85 °C |
| Max pressure | 300 psi (21 kg/cm²) |
| Inlet thread | NPT 1/2" male |
| Material | Brass inlet, steel reel (epoxy) |
| Installation | Ceiling / wall / under counter |

Same reel as SR-OR-107-G with a 15 m hose for larger washdown areas.
| Hose length | 15 m (49 ft), 3-layer steel wire |
| Max temp. | 85 °C |
| Max pressure | 300 psi (21 kg/cm²) |
| Inlet thread | NPT 1/2" male |
| Material | Brass inlet, steel reel (epoxy) |
| Installation | Ceiling / wall / under counter |

Long-reach version for large bays and yards where one drop point must cover the whole floor.
| Hose length | 20 m (65 ft), 3-layer steel wire |
| Max temp. | 85 °C |
| Max pressure | 300 psi (21 kg/cm²) |
| Inlet thread | NPT 1/2" male |
| Material | Brass inlet, steel reel (epoxy) |
| Installation | Ceiling / wall / under counter |

Economy line with 3/8" hose and shower head. Lower cost where the duty cycle is light.
| Hose length | 3/8" · 10.7 m, 3-layer steel wire |
| Max temp. | 80 °C |
| Max pressure | 300 psi (21 kg/cm²) |
| Inlet thread | NPT 1/2" male |
| Nozzle type | Shower head |
| Installation | Ceiling / wall / under counter |

Grey epoxy reel with blue hose — a different look for front-of-house and retail areas.
| Hose length | 10.7 m, 3-layer steel wire, blue |
| Max temp. | 85 °C |
| Max pressure | 300 psi (21 kg/cm²) |
| Inlet thread | NPT 1/2" male |
| Nozzle type | Brass gun, 360° rotating |
| Reel material | Grey epoxy coated steel |

304 stainless reel for hygiene-critical and corrosive environments. Highest grade in the range.
| Hose length | 10.7 m, 3-layer steel wire |
| Max temp. | 85 °C |
| Max pressure | 300 psi (21 kg/cm²) |
| Inlet thread | NPT 1/2" male |
| Reel material | 304 stainless steel |
| Bracket | 5 mm steel, adjustable stop |
Enclosed housing keeps the hose out of sight and protected — preferred where hygiene and appearance matter.

Fully enclosed 304 stainless housing with 10.7 m blue hose. The hose cannot be seen or touched.
| Hose length | 10.7 m, 3-layer steel wire, blue |
| Max temp. | 85 °C |
| Max pressure | 300 psi (21 kg/cm²) |
| Inlet thread | NPT 1/2" male |
| Housing material | 304 stainless steel |
| Nozzle type | Brass gun, 360° rotating |

Same enclosed housing with a 13 m hose for medium-size kitchens.
| Hose length | 13 m, 3-layer steel wire, blue |
| Max temp. | 85 °C |
| Max pressure | 300 psi (21 kg/cm²) |
| Inlet thread | NPT 1/2" male |
| Housing material | 304 stainless steel |
| Nozzle type | Brass gun, 360° rotating |
Spring-loaded pre-rinse unit with 1.42 GPM spray valve and 18" flexible hose — the US standard configuration.

Single-hole, single-temperature pre-rinse unit with 6" adjustable wall bracket.
| Spray valve flow | 1.42 GPM |
| Hose length | 18" (457 mm) spring stainless |
| Connection | 1/2" NPSM with 5/8" reducer |
| Overall height | 965 mm |
| Deck hole | 25 mm |

Single-hole, dual-temperature version for stations that need hot and cold at the same point.
| Spray valve flow | 1.42 GPM |
| Hose length | 18" (457 mm) spring stainless |
| Connection | 1/2" NPSM with 5/8" reducer |
| Overall height | 985 mm |
| Deck hole | 35 mm |

Dual-hole, dual-temperature unit on a 4" base for standard deck cut-outs.
| Spray valve flow | 1.42 GPM |
| Hose length | 18" (457 mm) spring stainless |
| Base size | 4" · hole centres 102 mm |
| Overall height | 985 mm |
| Connection | NPT 1/2" NPSM |

Dual-hole, dual-temperature unit on an 8" base — the most common US pre-rinse configuration.
| Spray valve flow | 1.42 GPM |
| Hose length | 18" (457 mm) spring stainless |
| Base size | 8" · hole centres 203 mm |
| Overall height | 985 mm |
| Connection | NPT 1/2" NPSM |

Wall-mounted pre-rinse unit where there is no deck space at the sink.
| Spray valve flow | 1.42 GPM |
| Hose length | 18" (457 mm) spring stainless |
| Installation | Wall |
| Connection | NPT 1/2" NPSM |
| Overall height | 985 mm |
Wall-mounted 8" mop sink faucet with 1/2" inlet and 3/4" outlet for hose or bucket hook-up.

8" wall-mount mop sink faucet with pull rod, 1/2" male inlet and 3/4" male outlet.
| Spout | 8" |
| Inlet thread | NPT 1/2" male |
| Outlet | NPT 3/4" male |
| Deck holes | 22 mm × 2, centres 203 mm |
| Installation | Wall |
Touch-free operation for hand-wash and food-prep stations.

Brass sensor faucet with adjustable infrared range, water-proof control box and manual mixing valve. AC/DC dual power.
| Material | All brass |
| Dimensions | ≥160 × 148 × 140 mm |
| Spout height | 114 mm above counter |
| Sensing distance | 25–80 cm, adjustable |
| Power supply | AC/DC dual |
| Deck hole | 25 mm |
| Inlet thread | 1/2" male (thread standard to be confirmed) |

Compact all-brass sensor faucet with 1.5 V battery or AC module.
| Material | All brass, polished chrome |
| Sensing distance | 25 cm, adjustable |
| Power supply | AC or 1.5 V × 4 battery |
| Deck hole | 25 mm |
| Inlet thread | 1/2" male (4 fen), thread standard to be confirmed |
| Note | No power-off water cut protection |

Sensor faucet with vandal-proof 2.2 GPM aerator and power-off protection.
| Material | All brass, polished chrome |
| Sensing distance | 25 cm, adjustable |
| Aerator | 2.2 GPM (8.3 LPM), vandal-proof |
| Power supply | AC/DC dual |
| Deck hole | 25 mm |
| Spout | 280 mm from deck |
| Inlet thread | 1/2" male (thread standard to be confirmed) |

Same body and aerator as SR-SN-03, without power-off protection.
| Material | All brass, polished chrome |
| Sensing distance | 25 cm, adjustable |
| Aerator | 2.2 GPM (8.3 LPM), vandal-proof |
| Power supply | AC/DC dual |
| Deck hole | 25 mm |
| Spout | 280 mm from deck |
| Inlet thread | 1/2" male (thread standard to be confirmed) |
| Note | No power-off water cut protection |
Deck-mount kitchen sink faucets for commercial basins.

Dual-temperature mixer with 6" gooseneck spout, brass body, polished chrome.
| Material | Brass, polished chrome |
| Spout | 6" (152 mm) gooseneck |
| Deck holes | 2 × 25 mm, centres 203 mm |
| Inlet thread | NPT 1/2" |
| Valve type | Brass compression |
Dimensions, flow rates and packing data for any model are available on request — including OEM options with your brand on the product and carton.